AutoCAD Quiz Online Test Mcqs

Test Instructions
Test Name	:	Autocad MCQs
Subject	:	Computer General
Test Type	:	Mcqs
Total Question	:	25
Total Marks	:	50
Total Time	:	20 Minutes

Used for 2D and 3D computer-aided design (CAD), the software first became available for usage during 1982 and is now used in a wide range of industries. Due to the importance and common usage of the software, one must have information atleast its basic functioning and if you don’t then do not worry as you can do si with ease by attempting this quiz.

AutoCAD Quiz Online Test Mcqs Questions with Answers Objective Type PDF

Question 1 of 25

Uncategorized

1. To determine if two parts (3D Solids) will fit together without any interference, what 3D AutoCAD command would you use?

SUBTRACT

INTERFERE

UNION

INTERSECT

Question 1 of 25

Question 2 of 25

2. Which of the following is NOT a property of an object?

Hyperlink

Measure

Elevation

Line weight

Question 2 of 25

Question 3 of 25

3. What is the usefulness of viewports?

Give us the ability to see projects have become a newer version of AutoCAD from our

Allows us to see the screen or on paper different views of the same project

None of the above

We can make a change in one part of the plan, without affecting the rest

Question 3 of 25

Question 4 of 25

4. Which one of the following AutoCAD objects can NOT have a 3D (Z) thickness property applied to it?

TEXT

CIRCLE

MTEXT

LINE

Question 4 of 25

Question 5 of 25

5. In AutoCADÂ®, all objects are drawn on the?

XY plane

YZ plane

ZX plane

XZ plane

Question 5 of 25

Question 6 of 25

6. You have just created an interesting new round object by using REVSURF to revolve a complex curve around an axis. However you find there are only 6 faces around the perimeter leaving it very rough looking. What variable do you change to correct this?

Set TABSURF2 to 18

Set TABSURF1 to 18

Set SPLINESEGS to 12

Set SURFTAB1 to 18

Question 6 of 25

Question 7 of 25

7. The right-hand rule is used to determine the direction of the ______?

negative Y axis.

negative X axis

positive X axis

positive Z axis.

Question 7 of 25

Question 8 of 25

8. What is the difference between the Scale command from the command Zoom?

H Scale can grow / shrink a shape up 10 times, while the Zoom has no limits

Scale for single object, while the Zoom whole plan

No difference

H Scale changes the size of objects, while the Zoom changes the visibility of the project

Question 8 of 25

Question 9 of 25

9. You apply a property called Thickness to a standard AutoCAD CIRCLE. What type of AutoCAD object do you now have officially?

Cylinder

PLINE

Solid Model (3D Solid)

Surface Model (Polygon Mesh)

Question 9 of 25

Question 10 of 25

10. Which AutoCAD command will determine precisely the volume of a complex (or simple) 3D Solid part?

VOLUME

MASSPROP

PART

AREA

Question 10 of 25

Question 11 of 25

11. Which command convert discrete objects in polyline?

Subtract

Polyline

Union

Join

Question 11 of 25

Question 12 of 25

12. You want to draw an octagon shape window on a vertical wall face in your 3D House Plan. Which UCS command option is best suited to place your User Coordinate System on this front wall face to ensure the window is placed flat on this wall?

Origin

View

3point

ZAxis

Question 12 of 25

Question 13 of 25

13. All of the axes in the 3D coordinate system meet at?

135Â° angles

120Â° angles.

60Â° angles.

90Â° angles.

Question 13 of 25

Question 14 of 25

14. Which of these objects will only draw flat on the current XY working plane and not allow 3D coordinate input (e.g. Z input)?

3DPOLY, LINE

DONUT, CIRCLE, PLINE

LINE

3DPOLY

Question 14 of 25

Question 15 of 25

15. To print the entire project, you will choose to regulate what to plot?

Window

Limits

Extends

Display

Question 15 of 25

Question 16 of 25

16. You have just issued the HIDE command on a new 3D House Plan to see how the design looks, but find that all of the interior room labels are showing through your opaque walls, ruining the 3D effect. What can you do with the TEXT objects to fix this?

Assign the Hide property to all TEXT.

Place the TEXT on a no plot layer.

Assign a thickness of 0.001″ to all TEXT.

Place the TEXT on the Defpoints layer.

Question 16 of 25

Question 17 of 25

17. The purpose of the UCSICON command is to?

Permit a user to redefine the location of 0,0.

Permit a user to control the placement and appearance of the icon to help you understand your orientation in the XYZ coordinate system

Provide a working plane to draw on

Permit a user to move the UCS system

Question 17 of 25

Question 18 of 25

18. The primary purpose of the UCS (User Coordinate System) is?

Allows a user to select the desired type of drawing units.

To determine angles for isometric projections.

Allows a user to draw on a specified 2D Plane in 3D space

Helps a user to calculate the area of an object.

Question 18 of 25

Question 19 of 25

19. What you cannot create from the command Offset?

Parallel arcs

Concentric circles

Vertical straight

Three parallel lines

Question 19 of 25

Question 20 of 25

20. The axis used to show depth in AutoCADÂ® is the______?

W axis

Z axis

Y axis

X axis

Question 20 of 25

Question 21 of 25

21. What is the volume of a cone with a 12′ radius and a 12′ height?

3,126,951.13 cu in

3,126,195.13 cu in

3,162,915.13 cu in

3,126,915.13 cu in

Question 21 of 25

Question 22 of 25

22. When to fix a block attribute?

No matter the number

When I make the block

After fix the block

Before you fix the block

Question 22 of 25

Question 23 of 25

23. When drawing in 2D, what axis do you NOT work with?

WCS

Question 23 of 25

Question 24 of 25

24. By what symbol shows the snap point to the closest point?

With Diamond

With three orthogonal

With two triangle

with circles and dots in the center

Question 24 of 25

Question 25 of 25

25. The primary difference between the Model tab and the Layout tab(s) is ____?

The color of the background

The Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on

The Model tab displays the drawing you are copying from and the Layout tab is where you lay out the new drawing

The Model tab is used for drawing in 3D and a Layout is used for drawing in 2D

Question 25 of 25

You Can Learn and Gain more Knowledge through our Online Quiz and Testing system Just Search your desired Preparation subject at Gotest.

Check Other Related Topics

Android Quiz Online Test Mcqs

Computer MS Word Shortcuts Keys Info Quiz 2 Online Important Mcqs Test

Computer MS Excel Shortcuts Keys Info Quiz 2 Online Important Mcqs Questions

Basic Information Technology Info Quiz 2 Online Mcq’s Questions Test

Computer General Online Test 4 MCQ’s for IT Skills Preparation

Computer Hardware Basic Info Quiz Online General Knowledge Mcq’s Test

Java Programming Language Quiz Online Mcq’s Questions Test

CSS Language Quiz Online Test Mcqs

2016-08-26

Zubair Asghar

Facebook
Twitter
Google +
Pinterest

Gotest

AutoCAD Quiz Online Test Mcqs

Test Instructions

AutoCAD Quiz Online Test Mcqs Questions with Answers Objective Type PDF

Uncategorized

Check Other Related Topics

One comment

Leave a Reply Cancel reply